90432. BATWING SWEATER WITH MATCHING FAUX TURTLENECK, LEG WARMERS, AND SCARF

Artnr
90432

Have you made this pattern? Show us with hashtag #jarbogarn

Description information
Version number: 1
Translator: Carol Huebscher Rhoades

YARN Raggi (70% superwash wool, 30% nylon; 165 yd/151 m / 100 g, CYCA #4, Aran)
YARN SUBSTITUTE: Järbo 4-ply Gästrike (100% wool; 164 yd/150 m / 100 g, CYCA #4, Aran)

SWEATER (A)
SIZES S (M, L, XL)
FINISHED MEASUREMENTS
Chest: approx. 35 (39½, 43¾, 48) in / 89 (100, 111, 122) cm
Circumference, lower edge: approx. 35 (39½, 43¾, 48) in / 89 (100, 111, 122) cm
Total Length: approx. 26¾ (27½, 28¼, 29¼) in / 68 (70, 72, 74) cm
YARN AMOUNTS Approx. 700 (700, 800, 900) g
NEEDLES U. S. sizes 7 and 8 / 4.5 and 5 mm
GAUGE Approx. 18 sts in St st on larger size needles = 4 in / 10 cm. Adjust needle size to obtain gauge if necessary.

SCARF (B)
FINISHED MEASUREMENTS Width approx. 11¾ in / 30 cm; length 63 in / 160 cm
YARN AMOUNT approx. 400 g
NEEDLES U. S. size 10½ or 11 / 7 mm
GAUGE 21 sts in k1, p1 ribbing, unstretched = 4 in / 10 cm. Adjust needle size to obtain gauge if necessary.

FAUX TURTLENECK (C)
FINISHED MEASUREMENTS Length: front approx. 8¾ in / 22 cm; back approx. 6¼ in / 16 cm
YARN AMOUNT approx. 200 g
NEEDLES U. S. sizes 8 and 9 / 5 and 5.5 mm
GAUGE approx. 17 sts in St st on larger needles = 4 in / 10 cm. Adjust needle size to obtain gauge if necessary. 

LEG WARMERS (D)
FINISHED MEASUREMENTS Length: approx. 21¾ in / 55 cm
YARN AMOUNT approx. 300 g
NEEDLES U. S. size 9 / 5.5 mm: 16 in / 40 cm circular
GAUGE 21 sts in k1, p1 ribbing, unstretched = 4 in / 10 cm. Adjust needle size to obtain gauge if necessary. 

NOTES
M1 Increases:- lift strand between 2 sts and knit into back of loop.
Decreases: At beginning of row/round: K2tog. At end of row/round: ssk or k2tog tbl.

SWEATER (A)
BACK
With smaller size needles, CO 82 (92, 102, 112) sts. Knit 7 rows back and forth (the 1st row = WS). Change to larger size needles and stockinette. When piece measures 5½ (6, 6¼, 6¾) in / 14 (15, 16, 17) cm, dec 1 st at each side.
When piece measures 8¾ (9, 9½, 9¾) in / 22 (23, 24, 25) cm, dec 1 st at each side.
When piece measures 17¾ (18¼, 18½, 19) in / 45 (46, 47, 48) cm, BO 4 sts at each side. On every other row, BO another 1 st at each side 2 times.
When piece measures 26 (26¾, 27½, 28¼) in / 66 (68, 70, 72) cm, beginning on WS, knit 7 rows in garter st. BO, making sure bind-off is not too tight.

FRONT
Work as for Back.

SLEEVES
With smaller size needles, CO 44 (46, 46, 48) sts. Knit 7 rows back and forth (the 1st row = WS). Change to larger size needles and stockinette. Increase 1 st at each side on, alternately, every 4th and 6th row 20 (22, 22, 22) times = 84 (90, 90, 92) sts.
When sleeve measures 17¼ (18¼, 18¼, 18½) in / 44 (46, 46, 47) cm, BO 4 sts at each side. Next, on every other row, BO 1 st at each side 2 times. BO rem sts loosely.

FINISHING
Join shoulders. Leave approx. 8¾ (9½, 9½, 10¼) in / 22 (24, 24, 26) cm or desired width open at the center for the neckline. Attach sleeves, making sure sleeve caps are centered at the shoulder seam. Sew sleeve and side seams. Weave in all ends neatly on WS.

SCARF (B)
With needles U. S. 10½ or 11 / 7 mm, CO 63 sts and work back and forth in k1, p1 ribbing. NOTE Always slip the last st wyf and knit the first st of every row for neat edges.
When scarf measures 63 in / 160 cm or desired length, BO somewhat firmly in ribbing. Cut 62 strands each about 9¾ in / 25 cm long (or desired length) for the fringe. Knot 2 strands into every other stitch.

FAUX TURTLENECK (C)
Front: With smaller size needles, CO 54 sts. Edge sts: always slip the last st wyf and knit first st of every row for neat edges. Knit 7 rows (the 1st row = WS). Change to larger size needles and stockinette, but, work k3 + edge st at each side. When piece measures 6 in / 15 cm, place the center 14 sts on a holder and work each side separately. On every other row, BO 3-2-2-1-1-1 sts at neck edge. When piece measures 8¾ in / 22 cm, BO rem 10 sts for shoulder. Work the other side to correspond.
Back: Work as for front until piece measures 5½ in / 14 cm. Place the center 24 sts on a holder and work each side separately. BO another 3-2 sts at neck edge on every other row. BO rem 10 sts for shoulder. Work the other side to correspond.
Collar: Join one shoulder. With smaller size needles, pick up and knit about 100 sts around neck (including sts on holders) and work back and forth in k1, p1 ribbing. After  2½ in / 6 cm, change to larger size needles. When collar measures 6¼ in / 16 cm, BO loosely in ribbing. Join other shoulder and collar. Because the collar will fold out, sew about 2¾ in / 7 cm with the seam allowance on the inside and then seam the rest with seam allowance facing out.

LEG WARMERS  (D)
CO 80 sts on circular U. S. size 9 / 5.5 mm. Join, being careful not to twist cast-on row; pm for beginning of rnd. Work around in k1, p1 ribbing for about 21¾ in / 55 cm or until slightly more than 150 g yarn is left. Place sts on holder while you work the second leg warmer. Do not cut yarn but work second leg warmer from opposite end of ball until same length as first. Work alternately on each until there is just enough yarn to bind off. BO in ribbing.

Write Your Own Review
You're reviewing:90432. BATWING SWEATER WITH MATCHING FAUX TURTLENECK, LEG WARMERS, AND SCARF

Yarn alternative: Please be aware that the gauge (tension), yarn quantity and the shape of the work varies if you use another yarn (even in the same yarn group).
To avoid problems: Read entirely through the pattern before you begin. 
Gauge (tension): Always knit/crochet a gauge swatch according to the recommendations. If you get a different gauge, try with a smaller or larger needle size. If the gauge isn't correct the work may be a different shape and size.
To make it easier to follow the instructions, use a colored pencil or highlighter to mark your size.
Chart: To make it easier to follow the chart, use a ruler under the on-going row.
Tips för hand dyed yarn: Make sure you have enough yarn to complete your project. The colors may vary from time to time. To get a smooth color mix, you can alternate between two skeins: knit two rows from one and two rows from another skein.

Knitting
alt=alternately, approx.=approximately, beg=begin, bl=back loop, BO=bind off, cc=contrasting color, cn=cable needle, CO=cast on, col=color, cont=continue, dec=decrease, dpn(s)=double-pointed needles, fl=front loop, g st=garter stitch, inc=increase, k1f&b=knit in front and back loop of same stitch, k=knit (stitch), k2tog=knit two stitches together (right-slanting decrease), kw=knitwise, LH=left hand needle, m=marker, mm=millimeters, mc=main color, p=purl (stitch), patt=pattern, pm=place marker, pw=purlwise, rep=repeat, rnd(s)=round/rounds, RH=right hand needle, RS=right side, sl=slip, sl m=slip marker, ssk=slip, slip, knit, st(s)=stitches, St st=stockinette stitch, tog=together, WS=wrong side, wyib=with yarn in back, wyif=with yarn in front, yo=yarn over

Crocheting
approx.=approximately, beg=begin, bl=back loop, ch=chain stitch, col=color, cont=continue, dc=double crochet, dec=decrease, dtr=double treble crochet, fl=front loop, hdc=half double crochet, htr=half treble crochet, inc=increase, m=marker, mc=main color, rep=repeat, rnd/rnds=round/rounds, RS=right side, sc=single crochet, sl st=slip stitch, sts=stitches, tog=together, tr=treble crochet, tr tr=triple treble crochet, WS=wrong side, yo=yarn over

The range of movement for the garments in our patterns varies depending on the garment type, shape and design. In order to find the right size, we recommend that you first measure all measurements directly on the body, according to the tables below. Then you decide the size of the garment yourself, based on how much movement you want the garment to have.

Chest (a), waist (b) and hips (c) are measured around the body. 
Children's clothing is measured in centilong (cl),which is the same as the childs length. 
Premature = Children born before the week of pregnancy 38.

Do you have a question? Write to us at info@jarbo.se and we will help you!